View SLD335F_4455492.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

5W High Power Laser Diode
SLD335F
Description
The SLD335F is a 5W high power laser diode designed to have a uniform emission area that is suitable for the applications for solid-state laser excitation, measurement, printing, etc.
Features
High-power Recommended optical power output Po = 5W High-optical power density: 5W/200m (Emitting line width)
Package
M-S035
Structure
AlGaAs quantum well structure laser diode
Operating Lifetime
MTTF 10,000h (effective value) at Po = 5W, Tc = 25C
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
-1-
E07620-CR
SLD335F
Absolute Maximum Ratings
(Tc = 25C) Optical power output Reverse voltage Operating temperature Storage temperature Pomax VR Tc Tstg LD 5.5 2 -10 to +30 -40 to +85 W V
C C
Warranty
Reliability assurance does not apply to this product. Because of the nature of an open heat sink product, the product shall be handled with special care to avoid any damage by handling and atmosphere including dusts and hemidity. Quality shall be assured by proper atmosphere maintained by sealed packaging. Laser diodes naturally has differing lifetimes which follow a Weibull distribution.
-2-
SLD335F
Electrical and Optical Characteristics
(Tc = Case temperature, 25C) Item Threshold current Operating current Operating voltage Wavelength Radiation angle Perpendicular Parallel Position Angle Differential efficiency Symbol Ith Iop Vop p X Y D Po = 5W Po = 5W Po = 5W Po = 5W Po = 5W Po = 5W Po = 5W Po = 5W Conditions Min. -- -- -- 805 15 4 -- -- -- -- 0.65 Typ. 0.8 5.2 2.2 -- 23 11 -- -- -- -- 1.1 Max. 1.5 6.5 3.0 811 33 17 100 100 3 4 -- Unit A A V nm degree degree m m degree degree W/A
Positional accuracy
-3-
SLD335F
Notes On Handling
Care should be taken for the following points when using this product. 1. This product corresponds to a Class 4 product under IEC60825-1 and JIS standard C6802 "Laser Product Emission Safety Standards".
LASER DIODE LASER DIODE This product complies with 21 CFR Part 1040.10 and 1040.11 LASER RADIATION AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION Sony Corporation AVOID EXPOSURE Laser radiation is emitted from this aperture. 1-7-1 Konan, Minato-ku, Tokyo 108-0075 Japan
MAXIMUM OUTPUT WAVELENGTH
OVER 1 W 600 - 950 nm
CLASS IV LASER PRODUCT
2. Eye protection against laser beams Take care not to allow laser beams to enter your eyes under any circumstances. For observing laser beams, ALWAYS use safety goggles that block laser beams. Usage of IR scopes, IR cameras and fluorescent plates is also recommended for monitoring laser beams safely. 3. Gallium Arsenide This product uses gallium arsenide (GaAs). This is not a problem for normal use, but GaAs vapors may be potentially hazardous to the human body. Therefore, never crush, heat to the maximum storage temperature or higher, or place the product in your mouth. In addition, the following disposal methods are recommended when disposing of this product. (1) Engaging the services of a contractor certified in the collection, transport and intermediate treatment of items containing arsenic. (2) Managing the product through to final disposal as specially managed industrial waste which is handled separately from general industrial waste and household waste. 4. Prevention of surge current and electrostatic discharge Laser diodes are most sensitive to electrostatic discharge among semiconductors. When a large current is passed through the laser diode for even an extremely short time, the strong light emitted from the laser diode promotes deterioration and then destruction of the laser diode. Therefore, note that surge current should not flow to the laser diode driving circuit from switches and others. Also, if the laser diode is handled carelessly, it may be destroyed instantly because electrostatic discharge is easily applied by a human body. Therefore, be extremely careful about overcurrent and electrostatic discharge. 5. Use for special applications This product is not designed or manufactured for use in equipment used under circumstances where failure may pose a risk to life and limb, or result in significant material damage, etc. Consult your Sony sales representative when investigating use for medical, vehicle, nuclear power control or other special applications. Also, use the power supply that was designed not to exceed the optical power output specified at the absolute maximum ratings. 6. Environment-related Substances to be Controlled No substances classified at Level 1 (immediate ban) of Sony Technical Standard, SS-00259, "Management regulations for the Environment-related Substances to be Controlled". The excerpt from SS-00259 is introduced on following URL. http://www.sony.net/SonyInfo/procurementinfo/ss00259/
-4-
SLD335F
Package Outline
(Unit: mm)
M-S035
6.35 0.1 1.8
Cathode 1.0 0.7
LD Chip
10.0 0.15 0.65 2.18 0.1
1.8
4.4
2.3
epth 0.1 d
1.4
0.1
0.
1 ho
le
Anode
Lead Strength 0.5kgf
SONY CODE EIAJ CODE JEDEC CODE
M-S035
PACKAGE MASS
1g
-5-
Sony Corporation
3.98 0.1 6.78 0.1

▲Up To Search▲

Price & Availability of SLD335F

	To Download SLD335F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .